The hardware planning desk · Surat

Find the detail.
Plan the next step.

Choose a guide, understand a measurement, and turn a photograph or idea into a clear hardware enquiry. Useful preparation for a home, workshop or interior project in Surat.

A useful place to start

The guide library.

Explore by the job you need to do. All guides are available below; the filters help you narrow the list.

Product guides

Choose the function first. Each guide explains the details to discuss with the showroom.

Brand & reference guides

Explore the source-backed references and practical selection questions. Confirm the current model, supply and price with the showroom.

Project & buying guides

Prepare the information that makes a comparison or quotation more useful.

Local buying context

Further reading about preparing a purchase in Surat, keeping useful records and understanding the business context.

A number needs a label

Measure with a purpose.

Record the units beside every dimension. For replacement work, photograph the fitting in place before removing it, then ask your fabricator which dimensions are needed.

Fixing centres

The distance from the centre of one fixing hole to the centre of the other. For a replacement handle, this is different from the handle’s total length.

Overall dimensions

The outside length, width or height of the item. Label the dimension you measured rather than writing only “size”. Include door or board thickness separately.

Projection & clearance

Projection describes how far the fitting extends from its mounting surface. Check nearby walls, drawers, shutters and the space for your hand as separate clearances.

The words behind the measurement.

Recess & depth
A recess is a cut-out or inset space. Depth describes how far it extends into the door, board or cabinet. A dimensioned sketch helps show exactly which surface you measured from.
Opening direction
Record which way the door or shutter moves and which side carries its hinges. Photograph it open and closed; ask the supplier to confirm the selected model’s handing convention.
Board or door thickness
The distance through the mounting material, from one face to the other. It is separate from the handle length and can affect the fixing assembly; confirm the details for the chosen item.

Clearance is the free space needed around a fitting or moving part. The required amount depends on the selected product and installation; a unit conversion cannot establish it.

Keep the units clear

Millimetres ↔ inches

One inch is exactly 25.4 millimetres. For example, 128 mm is approximately 5.039 inches. A conversion changes the unit, not the required fitting specification.

Check fixing dimensions against the selected model’s drawing before drilling or fabrication.

Before you visit

A small preparation kit.

  • A wide photograph showing where the item is used.
  • A close photograph of the fitting, model marks and mounting points.
  • Labelled measurements, with mm or inches written beside them.
  • Quantities separated by room, size, reference and finish.
  • A material sample or a photograph of the neighbouring surface.
Download the plain-text checklist

For a wardrobe, use the clear internal width, height and depth; allow your fabricator to check obstructions and the selected mechanism.

Your requirement, organised

Build a better enquiry.

Prepare a draft on this page, review it, then choose whether to share it. Keep the brief about the product and project; contact details are not needed in this tool.

  1. Identify the job. A new installation and a replacement need different details.
  2. Add what you know. Leave uncertain model or size details marked for confirmation.
  3. Review, then share. Add your photographs in WhatsApp yourself, or bring a printed checklist to the showroom.

The planner does not save entries between visits or send a message automatically. Confirm current options, quoted units and pricing with Bharmal before purchase.

A few useful answers

Before you share.

For help with a specific fitting, contact the Bhagal showroom .

What should I send for a hardware enquiry?

Send a clear photograph or catalogue reference, the application, labelled measurements with units, the quantity and the preferred finish. Add a close photograph of the existing fitting for replacement work. Confirm availability and the complete quoted unit with the showroom.

Does converting a measurement confirm that a fitting will fit?

No. The converter changes units only. Fixing centres, overall dimensions, board or door thickness, projection, clearances and the selected product specification must be checked separately with the person doing the fitting.

Does the enquiry planner send or save my details?

No details are sent by the planner itself or saved between visits. Generate a draft locally, review or edit it, and choose whether to copy, print or open it in WhatsApp. You decide whether to send the message in WhatsApp.

Can I see live prices or stock in these tools?

These are planning and reference tools. They do not show live inventory, prices or compatibility approval. Call Bharmal Hardware Khazana on +91 98253 55441 to confirm the current options before visiting.

Bhagal · Surat · Gujarat

Bring the context.
Compare the details.

Call before travelling to confirm opening hours and the current options for your requirement.

WhatsApp