Describe what the door needs to do.
Start a Tudoor handle enquiry with the opening, not just a picture of a finish. A handle used every day on a room door is part of a different conversation from a fixed pull on an entrance. State how the door should open and whether the requirement involves a latch, a lock, privacy or simply a grip.
Bharmal Hardware Khazana discusses selected Tudoor handles and decorative hardware in Bhagal, Surat. The product types below are general selection concepts to help explain your requirement; use the exact Tudoor model’s information to establish which configurations can be supplied.
| Selection concept | What to discuss |
|---|---|
| Lever handle | How the lever operates with the proposed latch or lock, its return movement and the space around it. |
| Fixed pull | Where a grip is needed, how the door is latched or locked separately, and the fixing arrangement. |
| Rose or backplate | The shape and coverage of the visible trim and its relationship to the door preparation. |
| Coordinated set | Which operating, locking, trim and fixing components are included in the selected requirement. |
Do not treat a decorative photograph as a full opening specification. Two similar handles may use different fixings or work with different components. The appropriate comparison is the complete selected arrangement.
Separate the handle, trim and lock.
A lever, its rose or plate and the lock are related parts, but their names do not describe the same thing. The rose is the visible mounting trim around the handle. A backplate can extend along the door and may incorporate additional openings. Their appearance and coverage matter, particularly when replacing old fittings.
The lock case is the mechanism fitted in or on the door. A cylinder or privacy mechanism, where required, is another selection point. Ask the installer to identify the proposed operating arrangement and the relevant drawing. A handle described as a pair is not enough information to establish that a lock is supplied.
- List the visible handle and trim that you want to select.
- Identify the existing or proposed lock arrangement and any cylinder or privacy requirement.
- Ask which spindle, fixings and accessories accompany the quoted product.
- Keep each model and finish reference next to the component it describes.
For related information, see the locks and security category. For a complete door schedule, discuss the other door-hardware requirements with the installer as well.
Build a replacement record before removing parts.
When an existing handle needs replacing, start by recording what is already there. Take an overall photograph of the door, then closer front, side and edge views. Include the existing rose or plate, visible fixing points and lock face. Keep photographs labelled by door location if several openings are involved.
Ask the installer which measurements can be taken without disturbing the door and which require a closer inspection. Do not dismantle an unfamiliar lock solely to complete an online enquiry. A product code, original fitting drawing or previous invoice can make the identification more precise.
| Replacement detail | Why it is useful |
|---|---|
| Door material and thickness | Helps check the fixing and operating arrangement for the selected product. |
| Existing trim footprint | Shows the area that a replacement rose or plate may need to cover. |
| Fixing locations | Allows comparison with the selected fitting’s drawing rather than its appearance. |
| Lock face and reference | Helps identify the related mechanism and the correct dimensions to compare. |
| Opening direction | Helps communicate any handing or clearance questions. |
Send the record before purchasing a lookalike. A larger decorative trim might cover an old mark but still have the wrong fixing or operating geometry. Appearance and fit need separate checks.
Ask for the right measurements.
Use names with measurements so the quotation and drawing can be compared clearly. “Centre distance” on its own can be ambiguous. It may refer to the relevant fixing points, or to operating centres in a lock arrangement. Mark the two points on a photograph or drawing instead of sending an unexplained number.
Fixing centres concern the spacing between the fixings being compared. A lock backset concerns the distance from the lock-face or door-edge reference to the operating centre, as defined in the drawing. Projection describes how far a fitting stands away from the door surface. None is a substitute for door thickness.
A handing description needs similar care. Send a plan or image showing the hinges, viewing side and opening direction, then ask the supplier to confirm its convention for the selected model. Avoid assuming that every supplier uses the same left-hand or right-hand description.
The Tudoor finish and fitting guide provides a field-by-field record. It deliberately leaves numerical dimensions to the selected product sheet and the actual door.
Turn a shortlist into a complete enquiry.
Once the application is clear, shortlist the visual direction and ask for the current Tudoor reference. Record the model, the precise finish name or code, the number of doors and the required quantity. Keep different doors on separate lines if they have different thicknesses, locks or opening arrangements.
Ask whether the quotation is for one piece, a pair or a set. Request the list of included components and note any separately supplied items. Confirm current availability and supply timing with Bharmal before planning installation around the selection. Where a warranty is offered, request its written terms for the chosen product.
- Reference or catalogue image, labelled by door location.
- New door or replacement, door material and thickness.
- Lock or privacy arrangement and the relevant measured drawing.
- Preferred finish, quantity, quoted unit and required components.
Return to the Tudoor range page for the overall enquiry checklist, or contact the showroom with your prepared record.
Questions about handle selection.
Where should I begin when choosing a Tudoor door handle?
Begin with the door’s use, whether it is new or a replacement, its material and thickness, and the lock or privacy requirement. Then share the selected Tudoor reference or photograph with Bharmal.
What is the difference between a lever and a fixed pull?
A lever is an operating handle used with a compatible latch or lock arrangement. A fixed pull provides a grip for pulling the door and does not by itself establish how the door latches or locks.
What does a rose do?
A rose is the trim around a handle’s mounting point. Its shape and size affect appearance and coverage, while the underlying fixing and operating requirements still need to match the door and lock arrangement.
Does a handle pair automatically include a lock?
No. A piece, pair or set can describe different supplied contents. Ask for an itemised list showing the handle components, fixings, lock, cylinder and any privacy accessories included in the quotation.
What photographs help with a replacement enquiry?
Photograph both sides of the door and its edge. Include the existing handle, trim, visible fixings and lock face, along with any readable product reference.
Are fixing centres and backset the same measurement?
No. Fixing centres describe spacing between the relevant fixing points. A lock backset is measured from the lock face or door edge reference to its operating centre as defined by the product drawing.
How should I describe left-hand or right-hand operation?
Send a simple plan or photograph showing the viewing side, hinges and opening direction. Ask the supplier to confirm its handing convention for the exact product instead of relying on a left or right label alone.
Can Bharmal confirm my final handle selection?
Share the reference, door and fixing details, finish and quantity with Bharmal in Bhagal, Surat. Ask for current product information and a quotation; the installer should confirm suitability for the actual door preparation.
Bhagal · Surat
Share the reference and the door details.
Send your selected Tudoor reference, the application, relevant measurements, quantity and finish preference. Call before visiting to confirm the current options and opening time.
