Curioz India · Buyer guide
Curioz India brass door knobs in Surat
Non-locking, key-operated and single-knob references need different questions before a door is prepared.
The useful starting point
Specify the required operation before choosing the decorative finish. Curioz references 152, 153 and 156 illustrate different published operation or set-content fields; confirm the actual assembly, fixing and current supply for your door.
Compare operation before appearance
Curioz’s knob tables contain useful distinctions that are easy to miss in a photograph. A non-locking knob, a key-operated arrangement and a single knob are different starting points for a door requirement. Use the reference and the operation field together when you enquire.
| Reference | Material and finish | Published detail | Confirm for your project | Source |
|---|---|---|---|---|
| 152 door knob | Solid brass; antique-brass finish | Non-locking; no rose; listed as a door-knob set | Compatible latch or lock arrangement and all supplied pieces | Curioz listing |
| 153 door knob | Solid brass; antique-brass finish | Key on one side; no rose; listed as a door-knob set | Intended operation, door preparation and included components | Curioz listing |
| 156 mortice knob | Solid brass; antique-brass finish | Round form; single-knob listing | Required assembly and whether other components are separate | Curioz listing |
These are selected fields from the Curioz knob listings. The table does not infer a complete locking assembly from a decorative knob photograph. Ask for the current item details and any compatible components for the opening.
Describe how the room should operate
Begin with the room and the required action. Explain whether the knob is intended to operate a latch, work with a separately specified lock, or provide a decorative grip. Where a locking function is wanted, describe which side needs a key and what the other side needs to do.
Make the operation visible on the door schedule. For a repeated residential or interior project, two similar-looking knobs may have different roles at different rooms. Treat them as separate lines when the function changes, even if the decorative finish is intended to match.
Bring the existing door preparation into the discussion
For a replacement, the existing holes and edge preparation are central to the selection. Photograph both door faces and the edge, and include a close view of the lock or latch identification where it can be seen. State whether the old assembly must be retained or whether the complete arrangement can be reviewed.
Give the installer the door material and measured thickness, the position of the existing preparation and the available space around the grip. The selected catalogue tables do not provide a universal drilling layout, so obtain the item’s required preparation before fabrication or installation.
- Door or room reference and the operation required at that location.
- Measured door thickness and photographs of both faces and the edge.
- Existing hole positions, visible marks and available coverage.
- Current lock or latch reference, if known.
- Knob reference, finish preference and required pieces or confirmed sets.
- A note identifying new work, complete replacement or reuse of existing components.
Check the visible assembly as a whole
The selected examples use an antique-brass finish description, but the visible result also depends on the components supplied. Ask how the knob, any backplate or rose, fixings and adjacent hardware will appear together on the actual door. A “no rose” catalogue field should prompt a coverage discussion for a replacement door.
Compare an available sample alongside the door surface and other metalwork. Confirm the material and finish for the exact reference, then keep that selection with the functional decision. This helps prevent a finish substitution from being treated as a complete model match.
Ask what the quoted set contains
The words “single knob” and “knob set” need to be resolved into actual pieces. Ask the quotation to identify what is supplied for each opening and which lock, latch, spindle, fixing or other components are separate. The selected manufacturer table gives a starting description, rather than a complete project bill of materials.
For several rooms, list the reference and operation against each door. Ask the installer to review compatibility before approving the repeated quantity. Keep the current model document or assembly detail with the quotation so that the person ordering and the person fitting it share the same requirement.
- Exact reference and operation, not just a decorative description.
- Number of openings and the quoted unit of supply.
- Included pieces and any separate components required.
- Door preparation and installer confirmation.
- Finish reference and approved sample, where available.
Keep operation and care information for later
Ask for the care instructions associated with the confirmed finish and the operating assembly. Give the cleaning instructions to the person responsible for the room, and keep any installation or adjustment guidance with the project record. Use the manufacturer’s method for the selected product.
Retain the reference, finish, operation and supplied-parts record after installation. A later enquiry can then identify whether the requirement concerns the decorative knob, a fixing or another part of the assembly. That distinction is more useful than replacing an entire selection from a colour photograph.
Useful answers before you enquire
What is the useful difference between Curioz references 152 and 153?
The manufacturer lists 152 as non-locking and 153 with a key-on-one-side operation. Both selected tables describe solid brass, an antique-brass finish and no rose. Confirm the full operating assembly for your door.
Does reference 156 include a complete lock set?
The selected manufacturer table describes 156 as a single round knob. It does not establish a complete lock body, cylinder or locking set; ask what is included in the current quotation.
What should I measure before replacing a door knob?
Record the existing door preparation, hole positions, door thickness, available grip clearance and the current lock or latch reference. Send photographs of both faces and the door edge.
Can I select a knob from its finish alone?
Start with the required operation and compatible door preparation, then compare the visible finish. A matching colour does not establish that the spindle, lock or fixing arrangement will fit.
Does “no rose” describe the whole door appearance?
It identifies a manufacturer listing field for these examples. Check the actual supplied components, visible coverage and any existing holes or marks on the door before approving the appearance.
Where can I enquire about Curioz knobs in Surat?
Contact Bharmal Hardware Khazana in Bhagal with the Curioz reference, desired operation, door photographs, dimensions, finish and quantity. Ask the showroom to confirm the current option and quoted contents.
Are the listed knob examples a live stock list?
No. They are manufacturer-published references for comparison. Bharmal should confirm the exact model, finish, supplied components, quotation and current availability for the requirement.
