Curioz India · Buyer guide
Curioz India brass door knockers in Surat
A decorative entrance detail needs the right scale, moving-part clearance and fixing arrangement.
The useful starting point
Choose the reference and its intended position together. Curioz’s published examples include solid-brass knockers with through-bolt mounting; the exact dimensions, finish and fixing components should be confirmed for your door.
Start with a recognisable catalogue reference
Curioz India publishes decorative brass knockers and kada designs. A reference number is more useful than a broad request for a traditional or antique-looking knocker, because the outline, moving element and fixing can vary between designs. Use the examples below to start a model-specific conversation.
| Reference | Material and finish | Published detail | Confirm for your project | Source |
|---|---|---|---|---|
| 226 door knocker | Solid brass; antique-brass finish | Listed knocker size: 5 inches; through-bolt mounting; lacquer-coated surface | Overall outline, fixing centres, projection and door thickness | Curioz listing |
| 218 door knocker | Solid brass; antique-brass finish | Through-bolt mounting; the catalogue contains more than one size reference | Exact selected size, fixing drawing and supplied components | Curioz listing |
| 239 decorative kada | Solid brass; antique-brass finish | Through-bolt mounting | Current dimensions and moving-part clearance | Curioz listing |
See the manufacturer’s knocker reference page for the current listing. This guide avoids treating different catalogue size fields as an interchangeable measurement. Request the drawing or dimensions for the precise reference being quoted.
Give the ornament room to work
Think about the knocker as a moving piece as well as a decorative outline. Its placement needs room for the ring or striking element to move, and a door layout that lets a visitor use it comfortably. Discuss the position alongside the pull, lock, nameplate or other entrance details.
For a panelled door, a wide decorative backplate may sit differently from a small ring design. Show the door divisions and mouldings in the enquiry photograph. If the design is being chosen before fabrication, mark a proposed position on the elevation and have the installer confirm the arrangement.
Record the measurements that affect fitting
A catalogue size is useful for visual scale, but fitting needs more detail. Record the overall ornament width and height, the projection, fixing-hole centres and the room needed by the moving element. Ask which measurements belong to the specific reference instead of transferring them from a similar design.
For a replacement, photograph the old fixing from both sides where accessible. State whether the door will be refinished or whether existing holes must be reused or covered. A decorative outline can change the visible coverage even when a model looks similar in a small photograph.
- Door material and measured thickness at the intended fixing position.
- Front elevation showing panels, trim and nearby entrance fittings.
- Available flat mounting area and clearance around the moving part.
- Existing hole centres and a close view of the reverse fixing, when accessible.
- Desired reference, finish and quantity for single or repeated entrances.
- Any finish sample or adjacent hardware that the knocker should complement.
Separate material, appearance and protection
The selected references identify solid brass and antique-brass finishes. Ask about the exact finish and any protective surface treatment on the item being supplied. Reference226, for example, has a lacquer-coating field in the manufacturer table; that detail should be checked for the chosen item rather than assumed across the range.
Compare the sample with the door under the lighting in which the entrance will normally be seen. Explain whether the opening is sheltered or exposed, and ask for the manufacturer’s application and care guidance. A finish description alone is not a complete exposure specification.
Specify the complete knocker requirement
A quotation should identify the reference, selected size and finish, the number of pieces and the supplied fixing components. Confirm how the through-bolt arrangement suits the actual door thickness. Keep any selected drawing or sample reference with the order enquiry.
For several entrances, give each door a location code and note any different thickness or panel arrangement. This keeps one approved decorative choice from being applied to an opening with a different fitting condition.
- Reference number and exact current catalogue image.
- Overall size and fixing measurements for the quoted version.
- Finish and any coating or care-document reference.
- Pieces required and fixing components included.
- Door references and the installer’s compatibility confirmation.
Ask for care information before handover
Keep the finish-specific care instructions with the door record. The person cleaning the entrance should know whether a protective coating is present and which cleaning method the manufacturer recommends. Do not treat every brown or antique-looking metal surface as the same finish.
Retain a photograph of the installed position and the product reference. If a moving part or fixing needs attention later, the installer can start from the actual item details. Ask for model-specific advice rather than tightening or substituting components based only on appearance.
Useful answers before you enquire
Which Curioz knocker references can I discuss with Bharmal?
Use references such as 226, 218 or 239 from Curioz India’s published knocker catalogue. Send the reference, desired finish, door photograph and quantity so Bharmal can check the current option.
What does the 5-inch size for reference 226 mean?
The manufacturer labels it knocker size. Confirm the overall outline, moving-ring clearance and fixing-hole centres for the exact item before preparing the door.
Does through-bolt mounting specify the required bolt length?
No. The mounting description does not establish the bolt length for your door. Give the measured door thickness and ask the supplier and installer to confirm the fixing components.
How should I choose a position for a decorative knocker?
Discuss the position on the actual door or approved drawing. Check comfortable reach, clearance for the moving part and room around panels, trim and other hardware before fixing.
Is a knocker the same thing as a pull handle?
A knocker provides a moving element for announcing a visitor; a pull handle provides a grip for operating the door. Confirm the selected item’s intended function rather than using its decorative appearance as the specification.
Can I match a knocker to an existing antique finish?
Send a clear photograph and the existing reference if known. Compare an available finish sample beside the door; ask for the exact material, finish and protective-coating details.
Does this page confirm immediate showroom availability?
No. These are attributed catalogue examples. Contact Bharmal Hardware Khazana in Bhagal, Surat to check the reference, finish, quantity and quotation before a visit or order.
