Selected Tudoor range · Buyer guide

Tudoor finishes and fitting: make the details clear.

Compare the selected finish, label the measurements and keep a complete quotation record. A practical guide for enquiries at Bharmal Hardware Khazana.

01

Treat material and finish as separate choices.

A finish describes the surface appearance; the base material describes the underlying product construction. A colour label is not a full specification. For a Tudoor enquiry, ask for the exact model reference, its stated material and its finish name or code on the same selection record.

Bharmal Hardware Khazana in Bhagal, Surat, discusses selected Tudoor handles and decorative hardware. This is a general comparison and fitting guide, rather than a table of technical specifications for unspecified Tudoor models. Use the current product information for the reference you select.

Start with the wider palette: the door, furniture, nearby metalwork and the desired visual effect. A warm-toned handle may relate differently to a painted door than to a wood surface. Compare actual selected samples where possible rather than treating a screen image or a familiar colour name as an exact match.

02

Compare samples in the project context.

Keep the handle or finish sample beside the door or furniture material when making the visual decision. Look at it under the lighting in which it will normally be seen. Surface texture, sheen and the surrounding colours can affect how the same finish appears.

If several components need to coordinate, compare them together. Handles, lock trim, visible hinges and other fittings may come from different ranges. A finish name that sounds the same is not proof of an identical colour or sheen. Record each selected component and its finish code rather than relying on a general project label such as gold or black.

  • Bring the actual door or furniture finish sample when practical.
  • Keep the selected model and finish reference together with the comparison image.
  • Label different locations when a project uses more than one finish.
  • Ask to confirm the current finish options for the specific model before ordering.

For the underlying handle arrangement, read the door-handle selection guide. A pleasing finish should be checked alongside the required operation and fixing.

03

Use precise names for fitting dimensions.

Several measurements can appear on a handle or lock drawing. They answer different questions, so describe the endpoints or reference surfaces with every number. Ask the installer to compare the selected product drawing with the actual door preparation.

FieldMeaning to clarifyPractical check
Fixing centresSpacing between the relevant fixing points.Mark the points on a photograph or drawing; do not send an unlabelled centre-distance value.
Lock backsetDistance from the defined lock-face or door-edge reference to the operating centre.Use the lock drawing’s reference, not the spacing between decorative trim screws.
Lock operating centresThe relationship between operating points in the selected lock arrangement.Ask which centres the drawing describes, such as handle and locking operation.
ProjectionHow far the fitting stands out from its mounting surface.Check nearby trim, frames, adjacent fittings and the intended movement.
Door thicknessThe actual thickness of the door where the product is fitted.Confirm the selected fixing and operating components suit that thickness.
Overall trim sizeThe external size of the rose, plate or other visible trim.For replacements, compare both its coverage and its fixing arrangement.

This table defines enquiry fields; it does not set universal dimensions or fit limits. Measurements must come from the actual door and the exact product information. A matching appearance cannot resolve a different fixing layout.

04

Check direction, clearance and the complete opening.

Tell the supplier which side of the door is being viewed and where the hinges sit. Add an arrow showing how the door opens. That simple record is more useful than an unexplained left or right description, because handing conventions need to be confirmed for the selected product.

Review where the hand will grip the handle and how the fitting moves in normal use. Check the frame, wall, adjacent door, other trim and any nearby fittings with the installer. A dimension such as projection is useful only when compared with the actual surroundings.

For an existing door, record the current handle and lock before choosing a replacement. For a new opening, discuss the hardware while the door preparation can still be coordinated. The door-hardware category and locks and security category help organise the related requirement.

05

Follow the selected finish’s care instructions.

Ask for the manufacturer’s care guidance for the exact model and finish. Keep that guidance with the product reference after installation. A cleaning product or polish used successfully on one surface should not automatically be applied to another finish.

Before first cleaning, check which method and products are approved, how residue should be removed and whether any maintenance is required. If the surface appearance changes, identify the model, finish and products already used when asking for advice. Do not experiment with abrasive pads, strong cleaners or a metal polish without confirming suitability.

Where a product is supplied with protective packaging or installation instructions, retain the relevant information for the installer and end user. Any finish-specific limitation or warranty term should come from the provider’s documentation, not from a general description on a different product.

06

Make the final selection easy to check.

Create one line for each selected component and door location. Record the Tudoor reference, material, finish code, quantity and quoted unit. Ask whether the quotation is for a single piece, a pair or a set, and list any fixings, lock, cylinder or other accessories included.

Keep sample photographs and the relevant drawing with that record. Ask Bharmal to confirm the current model, finish, quantity and supply timing before you arrange a visit or an installation. If a warranty is offered, request the provider’s terms against the selected reference.

  • Model reference and the catalogue or product information used.
  • Door thickness, labelled fitting measurements and opening-direction record.
  • Exact finish, quantity, quoted unit and included components.
  • Current availability, supply timing and any written provider terms.

Use the Tudoor range page to return to the overview or send the prepared details through the contact page.

Useful answers

Questions about finishes and fitting.

Does the finish name identify the handle material?

No. The base material and the surface finish are separate product details. Ask for both against the exact Tudoor model and finish reference on the quotation.

How can I compare a finish with my door or furniture?

Compare the selected finish or sample alongside the actual door or furniture material where possible. Keep its exact name or code with the model reference so the quotation records the same choice.

What is the difference between fixing centres and lock backset?

Fixing centres describe the spacing between relevant fixing points. Backset is a lock dimension from the defined lock-face or door-edge reference to the operating centre. Compare the selected product drawing with the actual door preparation.

What does handle projection mean?

Projection describes how far the fitting stands away from the mounting surface. Confirm the product’s dimension and check clearance around the door, frame, adjacent fittings and normal movement.

Why does door thickness matter?

Door thickness affects the selected fixing and operating arrangement. Record the actual thickness and ask the supplier or installer to confirm compatibility with the chosen model and its supplied components.

Can matching finish names from different products look identical?

Do not assume an identical appearance from the name alone. Compare the actual selected samples and confirm the finish codes for each component in the project.

How should Tudoor handles be cleaned?

Follow the manufacturer’s care instructions for the exact model and finish. Before using a cleaner or polish, ask whether it is approved; avoid assuming that a product suitable for one surface is suitable for another.

What should appear on the final quotation?

Record the model reference, material, finish name or code, quantity, quoted unit, included components, current availability and supply timing. If a warranty is offered, request the provider’s terms for that product.

Bhagal · Surat

Share the reference and the door details.

Send your selected Tudoor reference, the application, relevant measurements, quantity and finish preference. Call before visiting to confirm the current options and opening time.

WhatsApp