Curioz India · Buyer guide

Curioz India decorative brass domes in Surat

Choose decorative scale, arrangement and fixing with the exact reference in view.

The useful starting point

Treat the ornament outline, its location on the door and its fixing as separate decisions. Curioz’s published references give useful design and size starting points; confirm the selected version, finish and current supply with Bharmal.

01

Use the dome reference and size together

Curioz India lists decorative brass domes in different shapes and catalogue sizes. A small change in ornament scale can change the balance of a door composition, so identify the reference as well as the intended size. The selected listings below provide a starting point for that comparison.

Manufacturer-published references to discuss with the showroom
ReferenceMaterial and finishPublished detailConfirm for your projectSource
419 decorative domeBrass; antique-brass finishFlower form; listed sizes 1.5, 2, 2.5 and 3 inches; screw mountingExact outline, projection and fixing informationCurioz listing
421 decorative domeBrass; antique-brass finishListed sizes 1.5, 2, 2.5 and 3 inches; decorative applicationSize definition, selected finish and fixing componentsCurioz listing
430 decorative domeBrass; finish to confirmSquare decorative formCurrent finish sample and model-specific dimensionsCurioz listing

Review the manufacturer’s dome catalogue page with the exact reference in mind. Published size labels are useful for comparison, but they do not establish the fixing coordinates or current Bharmal stock.

02

Plan the ornament as part of the door composition

A decorative dome is chosen for its place in the overall elevation. Consider the door panels, mouldings, handle, knocker and other visible details together. Mark proposed ornament centres on a drawing so that the layout can be discussed without confusing the ornament’s outside size with its position.

For a repeated arrangement, decide whether every position uses the same reference and size. Record any different corner, centre or border detail separately. A labelled elevation is easier to review than a photograph with an unspecified request for “matching domes”.

03

Check outline, projection and surface separately

Measure the available flat area at the intended location, and describe the door or other surface material and thickness. Ask for the exact ornament outline, projection and fixing information. Where an existing ornament is being replaced, include photographs that show any holes, marks or uneven surface around it.

Use a simple paper outline or a measured elevation to discuss visual scale with the designer or installer. The template can illustrate the desired position, but the final fixing should follow the selected product’s actual details. Resolve those details before finishing the door surface.

  • Door or surface photograph with a location reference.
  • Available flat area and any panel, trim or edge clearances.
  • Reference number and selected catalogue size.
  • Required number of ornaments and the proposed arrangement.
  • Existing fixing marks or holes for replacement work.
  • Material, thickness and access relevant to the chosen fixing.
04

Match the finish through a sample, not a colour name

The selected 419 and 421 tables identify antique-brass finishes. For the430 reference, ask for the current finish description and an available sample instead of inferring that it matches another item. A catalogue can contain several appearance labels, and the model being quoted should settle the choice.

Compare ornaments alongside the other metalwork on the same entrance. Keep the approved reference and size with any finish sample or photograph. For a repeated layout, this also helps distinguish a deliberate design change from an unintended mixture of pieces.

05

Count the arrangement before requesting a quotation

Prepare a count by door or surface and mark which reference belongs to each position. Ask whether the quotation concerns individual pieces and which fixing components are included. Keep the selected size, finish and positioning information with the count so that the enquiry describes a complete arrangement.

If a reference changes during comparison, review its outline and fixing again. Similar decorative shapes can have different proportions, and a substitution should be checked before a prepared door or surface is altered.

  • Reference, size and finish for each distinct ornament.
  • Pieces required per door or surface, plus the total quantity.
  • Labelled elevation or positioning sketch.
  • Fixing information and supplied components.
  • Current quotation reference and installer review before fitting.
06

Include decorative pieces in the care record

Ask for the care method associated with the selected surface finish and any protective coating. Pass the instructions to the installer and the person maintaining the door. Use the product-specific guidance rather than assuming that a polish suitable for one metal surface suits every decorative finish.

Retain a photograph of the completed arrangement and the reference, size and finish record. If a piece is later needed for an extension or replacement, those details help the showroom distinguish the original design from a visually similar current listing.

Answers

Useful answers before you enquire

What are Curioz decorative door domes used for?

The selected manufacturer listings describe decorative brass ornaments, including flower and square forms. Discuss the intended door or surface, appearance and fixing rather than treating them as locking or structural components.

Which sizes are listed for references 419 and 421?

The selected catalogue tables list 1.5, 2, 2.5 and 3-inch sizes. Confirm what the chosen size measures and obtain the exact outline and fixing information for the version being quoted.

Is reference 430 the same finish as419 or421?

Do not assume a finish match from the reference number or photograph. Ask for the current finish description and compare a sample; the source uses different finish labels in some fields for 430.

Can I fit a dome to an existing door?

Discuss the surface material, thickness, available flat area and fixing requirements with the supplier and installer. Send a front photograph and any existing hole measurements before approving the position.

Does the listed ornament size give the screw position?

No. Keep the decorative outline, projection and fixing position as separate details. Ask for the exact reference’s fixing information rather than using the outline size as a drilling guide.

How can I compare several ornaments across one entrance?

Prepare a door elevation showing the proposed centres and adjacent hardware. Compare the selected size and finish at a representative location before releasing a repeated quantity.

Can Bharmal confirm a Curioz dome requirement in Surat?

Send Bharmal Hardware Khazana the reference, selected size, finish, door or surface photograph, fixing details and quantity. The showroom can check the current option and quotation for your requirement.

WhatsApp